Concorde twin 30mm

This Concorde was a super challenge to model because of the extreme tight packaging. It was critical to keep the structure super tight and form fitting around the electronics because of the long nature of the aircraft. If i wasnt careful it would easily be too heavy to fly. This bird flew amazing from the first throw! it was a matter of fine tuning the CG to get it dialed. The Concorde is easy to build, throw, fly and land! It can be easily scaled up to twin 40 or even twin 50! all my designs can be scaled up. I highly recommend you use these components: xfly twin 30mm (4s) https://a.co/d/gqEVy3f twin 20 amp esc https://a.co/d/3TqhFYT Battery! highly recommend an 850-1300 4s. 1100 is best https://a.co/d/f5wExt9 you may need an xt-30 to xt60 adapter. two 4.3g servos https://a.co/d/aCouIPH JST y adaptor for esc https://a.co/d/b52CLbU battery twin adaptor https://a.co/d/b9w2YOu use a 20" servo wire (thick as possible) for the motor wire extension.

Aircraft Specifications

• EDF: twin 30mm
• Skill Level: Beginner