F9F Panther 50mm

This little jet Rocks! The most fun I’ve had in a while. Simple to print, simple and fun to build and it rips. It took a lot of work but it was worth the headaches.

Flight video F9F Panther Is Awesome 👏 Files Available
https://youtu.be/NGrATCDQh0s

Parts Needed

Any 50mm fan but I prefer xfly 4s 4600kv
Any 40mm ESC
1500-2200 lipo recommend
ESC wire extensions for the fan
4x servo extensions
2x 9g servos https://a.co/d/06hyP0kJ
2x 4.3g servos https://a.co/d/0cvpngrM
1.2mm pushrod
Velcro for battery
Hot glue for the fan and servos
Depending on your printing weight you may need some weight for the nose

Build tips and tricks
-Always use a wire puller for servo wires
-Elevator servos may be a tight fit, make sure you take a few min to scrape the inside of the servo pockets, they do fit

Aircraft Specifications

• EDF: single 50mm
• Servos: 4