Vertigo! 64mm and 50mm versions

The Vertigo airframe is a popular design. many individuals and companies have made a similar style jet for RC and man do they fly well. The funjet/twinjet was the orignal and then a number of other manufacturers made it their own. I had to try this iconic design and im so happy I did. This is not an exaggeration, the Vertigo 100% few better than any funjet ive ever flown on the FIRST THROW!. its that good. The tracking and the response is so dialed in. I'll be the first one to admit it, I got lucky on this one. The wing, the canards and the fuselage really just worked perfectly when I designed it. My airfoils keep getting better and this one got the best profile so far. This Vertigo can fly super slow and also super fast with no change in feel or tracking. I kept the center of mass super close to the CG. This helps massively. The most amazing thing you will notice is the stall character, ultra docile and it really wont drop a wing unless you go so far under the minimum airspeed. 64mm weighs 1082g AUW 64mm Parts: Freewing 64mm 6s version HIGHLY Recommended 60amp ESC of your choice Highly Recommend a light 6s battery 330g or less to balance. SMC racing 2400 is great! 2 9G metal gear servos 2x 10mm magnets velcro hot glue ca glue 50mm weighs 550g AUW 50mm parts 50mm Xfly Galaxy Highly recommended 40mm ESC of your choice I didnt need motor wire extensions but you may depending on your motor and ESC I run the 1300-1500 4s Zeee lipo 2 9G MG servos 2x 8or 9mm magnets velcro CA glue

Aircraft Specifications

• EDF: single 64mm
• Servos: 2