Buy today at: https://cults3d.com/en/3d-model/gadget/f-35-c-rc-jet-e-flite-ultrix-electronics
This 3d printed F- 35 is one of the best flying 3d printed planes I’ve ever seen or flown. Eflite ultrix 600 donor electronics are required but you’re welcome to try your own build with twin props or even a pusher design. If you buy one I will make a pusher prop adapter. The plane is 360 g all up weight. In all honesty, it flies better than the ULTRIX. I will be listing all of the detailed print settings shortly it’s pretty straightforward. It does require some supports on certain sections. The only thing you will need to complete is a single 6mm carbon tube.
Description video https://youtu.be/jcgpiPGq9fk?si=E2nnq2jnOI7qbWSu
Flight video https://youtu.be/1mbch4n9xE0?si=QVUMoK9aw4p3Ee2S
https://youtu.be/LEUi6FZOXuk?feature=shared
Video showing the elevon/ full flying tail PLA hardware parts https://youtu.be/zE8VVsMwbb4?si=KFVRT0iuVw5SvYhZ
3D printing settings
Lw pla parts are single wall 1 or 2 top layers and 3-4% infill. The rear tails should be 5 % infill.
The rear body section should be 3% infill regular pla and hardware parts should be 15% regular pla