Buy today at: https://cults3d.com/en/3d-model/gadget/f117n-sea-hawk-twin-40mm
This is another model that could have or maybe does exist! It was known to be the carrier variant of the amazing F117 Night Hawk. This jet hand launches without a problem and can do pillow soft landings. Its very predictable. This Jet has gone through countless versions to make it what it is today. I started off with the design, it flew great for me and Thomas Heuer improved on the design, making it more scale and easier to print and fly!
Never buy 3d printed designs without videos!
Flight videos
https://youtu.be/BwhF3ppMdhg?si=GQN96bfWumjnWbXh
https://youtu.be/GmRdSW-psNs?si=F3vTLwlto9rhRx_l
My original version
https://youtu.be/k56D5cRsKJA?si=6RKHcH9r2Y88DT-O
Info;
ONLY 460-490 +/- grams without LiPo!
68.4cm x 76.2cm
Parts needed to complete:
EDF (2x) https://a.co/d/gQCJzqY
Servos (2x 9g Metal Gear)
ESC (2x) https://a.co/d/99Spw37
LIPO 4S2200 220-250g
y-splitter for receiver https://a.co/d/2BvmSld
y-splitter battery https://a.co/d/24vTr8i
2x 10mm magnets
Velcro fasteners
3D printing settings
3D PRINTING SETTINGS
As with all my designs, this one uses actively foamed LW PLA!
1 wall
2-3 top and 2 bottom layers
3% Gyroid works well for all parts except Elevon - print these with 5% Gyroid