Buy it now on cults: https://cults3d.com/en/3d-model/gadget/harrier-50mm
I love this!
I love flying it because its the sport jet I always wanted. I never like flying sport jets because they dont look like a real military jet, and they tend to wing/tip stall. This guy does not tip still like the sport jets ive flown.
The Harrier is easy to print, build and fly. It does not require a gyro to fly.
More flights https://youtu.be/DeQWgDdtSA0?si=Tl3NVOl-VafdMEm3
Build Along video https://youtu.be/WC6Gxm5Nmjo?si=mXLtzchXi4eZC2fE
Maiden Flights https://youtu.be/uW3hz5jMkRI?si=GcQ17xqEUgJ7CE6k
Parts required (Recommended)
50mm EDF
40 amp ESC
1300-1500 4s
4x 4.3g servos https://a.co/d/ciLuNXa
1.2mm Push rod
velcro
hot gule
medium ca glue for assembly
All up flying weight should be around 750g with a 13004s
3D printing settings
as always, i recommend setting up your specific printer to print active foaming LW PLA. pre foamed is ok but 10% heavier.
If the part doesnt have a specific setting it should be
1 wall
3%grid
2 top and bottom layers
fuse 1-5 - (3% grid )
fuse 6 - 5% grid
fuse 7 - 4% grid 2 wall!
all wing parts 4% grid (wing tips can be 5% grid)
all control surfaces ailerons and elevators 3% and 2 wall
Horizontal tails and vertical tail - 4% grid and 2 wall!