Buy today at: https://cults3d.com/en/3d-model/gadget/su-47-twin-40mm-edf-jet
This was my greatest accomplishment to date. From the start everything went exactly as planned. This forward swept winged beauty flies like a beginner jet but also will challenge even the experienced pilot. NOTHING at your field will be as cool or badass as this in the air... nothing. Like all my planes. this is easy to print. it can be printed on a 220/220/220 bed. it glues together with CA glue. builds in about 2 hours if youre familiar with my style. It hand launches as easy as my trainer jets and lands like a Pillow!! there are zero bad things to say about this SU-47 i'm so excited to share this with everyone! This will NEVER need a gyro or flight controller to fly stable and predictable.
items I used:
twin Xfly 40mm EDFs https://a.co/d/cM176HJ
twin 20amp ESC's https://a.co/d/cjaKb5e
2 9G metal gear servos https://a.co/d/gbuVBcX
Hot glue to attach the fans (small bead on each side when they are sitting straight.
2 sets of 6PCS 3.5mm Banana Gold Bullet... https://www.amazon.com/dp/B08GG7QX8J?ref=ppx_pop_mob_ap_share
This is super compact and light QIANRENON 1 in 2 XT60 Parallel... https://www.amazon.com/dp/B0CGDPNV9M?ref=ppx_pop_mob_ap_share
velcro for the battery
2 10mm magnets
2200-2800 4s lipo
flight video https://youtu.be/6-wm5Rsylck?si=Kgy7nwhZ_AjDHnf7 (never buy a plane without watching clear visible unedited flight video)
overview video and instructional coming today.
3D printing settings
like all my designs. Dial your printer for LW active foaming pla
1 wall
2 top and 2 bottom layers
3% grid infill or gyroid
the ready to fly weight is 850 grams!
id recommend printing my hinge material in TPU
control horns PLA+