Buy now at: https://cults3d.com/en/3d-model/gadget/vertigo-64mm-and-50mm-versions
Two planes for the price of one!
The Vertigo airframe is a popular design. many individuals and companies have made a similar style jet for RC and man do they fly well. The funjet/twinjet was the orignal and then a number of other manufacturers made it their own. I had to try this iconic design and im so happy I did. This is not an exaggeration, the Vertigo 100% few better than any funjet ive ever flown on the FIRST THROW!. its that good. The tracking and the response is so dialed in. I'll be the first one to admit it, I got lucky on this one. The wing, the canards and the fuselage really just worked perfectly when I designed it. My airfoils keep getting better and this one got the best profile so far. This Vertigo can fly super slow and also super fast with no change in feel or tracking. I kept the center of mass super close to the CG. This helps massively. The most amazing thing you will notice is the stall character, ultra docile and it really wont drop a wing unless you go so far under the minimum airspeed.
64mm weighs 1082g AUW
64mm Parts:
Freewing 64mm 6s version HIGHLY Recommended
60amp ESC of your choice
Highly Recommend a light 6s battery 330g or less to balance. SMC racing 2400 is great!
2 9G metal gear servos
2x 10mm magnets
velcro
hot glue
ca glue
50mm weighs 550g AUW
50mm parts
50mm Xfly Galaxy Highly recommended
40mm ESC of your choice
I didnt need motor wire extensions but you may depending on your motor and ESC
I run the 1300-1500 4s Zeee lipo
2 9G MG servos
2x 8or 9mm magnets
velcro
CA glue
Vertigo maiden flight https://youtu.be/2zzh4O8xea8?si=IfNNR7dNon-lZUZB
Vertigo more flights https://youtu.be/s36NzEXMlQE?si=SjYL_w3ceZU5Plmm
release video https://youtu.be/4z7ZZv25png?si=v2Lvyx0lUGfQOQI-
3D printing settings
Always use active foaming LW PLA
1 wall
2 top and 2 bottom
IMPORTAINT. You want to keep the front of the jet light and use more weight/heavier infill in the rear for balancing the CG.
2% gyroid for fuse1,2,3, canopy
3% gyroid for canards and fuse 4
4% gyroid for wings elevons and vertical tail
5% gyroid fuse 5 and 6 and hand laucher.