Darkstar Twin 50 (fully redesigned)

• If you already purchased the original darkstar from me this is free! go back into your download area and you will see the "gen 2 twin 50.0" (1270mm).

After getting some feedback from my customers I decided to redesign the whole airframe. I moved the fans so the weight balance will be much easier to obtain a proper CG. The twin 50mm scale also flies much better and less twitchy. Fantastic park flier and the LOOK of this thing in the air is crazy.

Flight video https://youtu.be/VZSih8JfzjA

Parts Needed

Any 50mm EDF's (2x)
Any 40 amp ESC's (2x)
y harness adaptor for the ESC's
3000 mha 4s lipo or similar size
3x 9g servos https://a.co/d/4fOtTFY
1.2mm pushrod
velcro for attaching the battery and esc's
hot glue for the EDF's and servos

Pre flight setup:
setup the two outer surfaces as elevons.
setup the middle elevator as a single elevator. use an auxilary channel and set the input to "elevator"

I personally used the lower holes on the control horns and top holes on my servo arms. I used 80% rate on roll and 90% on pitch. 30% expo on roll and 10% on pitch. I would use less rate and more expo than I did for your first flight.

Aircraft Specifications

• EDF: twin 50mm
• Servos: 3