- It was brought to my attention that the last two wing sections on the left side didn’t fit. I’ve uploaded those sections in the file section
Extremely satisfied and happy with how well this model went during the design process, printing process and the building and flying. Even the CG was dead on for the first throw.
The U2 flies like a trainer but I cant say its a Beginner plane. its long and flies like a glider so you need to know how to judge the landing. The hand launch can be done by almost anyone!
Flight Videos
Final Flights https://youtu.be/vGkb0biqCG8
Maiden Flights https://youtu.be/a5ylhopJNt4
The U2 is
57.0" (1448mm) wide
37.0" (940mm) long
it only weighs 850g ready to fly with a 1300 4s.
You can fly this plane with any size battery you wish. 1300-2200 is recommended.
Parts Required
50mm Xfly Galaxy is recommended
any 40 amp ESC
4x 4.3g servos https://a.co/d/48dZlBH
4x 18.0" (457mm) servo wire extensions
Wing spar https://a.co/d/fPwl5Jn
1.2 mm push rods
velcro for the battery
hot glue for servos and EDF
Medium CA glue for the build
1300-2200 4s lipo
Build tips:
you can glue the whole fuselage together before wire running.
I recommend placing the carbon spar through the fuselage and place the wings on but dont glue them. run the servo extensions through the wing parts before gluing everything together.
Aircraft Specifications
- EDF: single 50mm
- Skill Level: Beginner