This one will blow your mind when you see it fly! This iconic shape is a blast to see flying by, your buddies at the field will love it just as much! It’s fun to assemble and fun to fly.
Disclaimer! This can absolutely be flown manually, I’ve done multiple flights without a level mode activated, I still prefer it because it can be tricky to keep oriented. Also the roll rate is very high. If you choose to fly it without a gyro follow my pre flight checks below . Also this is a toy and a fun Rc model, use it appropriately.
Maiden flights RC Tomahawk Cruise jet 😂
https://youtu.be/zBGwKVQHgVs
Final flights
Parts Required
-xfly 64mm 4s fan (or any other 64)
-50-60 amp ESC (check your fans required amp)
-4x 4.3g servos https://a.co/d/05XkjUTu
- 1.2 mm push rod https://a.co/d/05LdxfaH
- Velcro for the battery and ESC
-hot glue for the fan/servos/EDF cover
- 4s 3000 lipo is what I used to balance. Anything smaller will cause low flight times and not enough nose weight.
Dimensions
50” x21”
Pre flight checks
-Make sure it’s balanced on the CG bumps
-Elector uses the holes on the bottom of the horns and top hole of the servo
-aileron servos should be on the top hole of the horns, also use anywhere from 50-70% rate on roll! At least 40% expo on roll is necessary
Aircraft Specifications
- EDF: single 64mm