Buy today at: https://cults3d.com/en/3d-model/gadget/triggen-aka-trelta-aka-christmas-tree-lol
Here we have something a little crazy! I wanted to paint this amazing triple delta in green and paint some balls and decorations on the tree but its too cold where i live to spray paint so unfortunately i wasn't able to do it before the release.
This jet flies just like the Viggen but more LIFT! it can high alpha slightly better and it actually is just as maneuverable thanks to the huge control surfaces.
Always make sure you watch multiple unedited flights before you buy 3d printed airplane designs
https://youtu.be/-bMPIOXV1K8?si=wwmgDY30cWiWorvp
Needed Hardware:
Any 50mm EDF, I use Power Fun or Xfly galazy 4s fans
any 40 amp 4s ESC
2x 9g servos https://a.co/d/cpFgJoU
ESC wire extensions https://a.co/d/96p9g0X
I highly recommend this battery https://a.co/d/b47rwjO or this https://a.co/d/0B54lUr
velcro for the battery
hot glue for the motor and servos
CA glue for the plane
3D printing settings
as always you need to dial your specific printer in for Active foaming LW pla
1 wall
2 top and 2 bottom layers
I recommend 3% grid for the whole plane. If your prints are on the weak side you may need 4% for the wing parts
you can save some weight with 2% on Canopy/EDF cover/ vertical tail