Buy today at: https://cults3d.com/en/3d-model/gadget/vermax-prop-jet-water-and-land-jet
The Vermax was a collaboration between myself and Thomas Heuer. I wanted to design a pusher plane that could take off from grass or water or snow! We have succeeded with this goal! the plane flies beautifully. The best way to understand the Vermax is to watch this video by Thomas https://youtu.be/LoCFxG2hqFI?si=JQbv7RrcI94JHTjJ
More Vermax flights
https://youtu.be/3uU0k6qp7Ko?si=lZnDe8EtRxL9wGNo
https://youtu.be/ifHiJATcynU?si=_DaxwRnBm-kxIo14
The Vermax can be built in several variants:
Land/Grass and Water-Option
In the water version, the winglets are larger and
the water rudder can be screwed on (Orange)!
2 propeller diameters (7 and 8 inches) and motor sizes!
You can also adjust the motor length and
camber/pull setting with washers.
Tested motors:
8 inches (x6):
Sunnysky X2212 KV1400
Motor: 27.5x30 mm
Lipo: 3 & 4S
ESC: 30–40A
7 inches (x6):
A2212 1400kv
Lipo: 3S
Motor: 27.5 x 26mm
ESC: 30A
3D printing settings
The following parts should be printed in PLA/PETG:
Rudder horn / Motor mount / Water-Rudder are also named in the print file.
The hinges should be printed in TPU
Before you print, please select the parts for the version you want to build!