BATJET V2 Twin 40 (new version) and the old single 50mm

Important setup before flight on V2- Please see the two photos I’ve marked up showing the proper up trim for the elevons. This eliminates porpoising. Right elevon 58mm Left elevon 62mm I went back to the drawing board and totally redesigned the Batwing 100%. My goal was to make a batwing that could hand launch easier and fly like a normal EDF. Its perfect now! the key to easier hand launches was the twin 40mm fans and the thrust angle. I also changed the airfoil, this provided better low speed flight performance. I also changed the fuselage so you can run a 1300-2200 4s and have it balance. The new design Part List for V2 twin 40: Twin Xfly 40mm edf https://amzn.to/4fyOndM 20 amp esc https://amzn.to/3UD4W01 2x 9g servos https://amzn.to/40vQwlW 2x 10mm magnets for the canopy Battery y adapter https://amzn.to/48BoQOG Hot glue to attach the motors and servos medium CA glue for the airframe Velcro for the battery.

Aircraft Specifications

• EDF: twin 40mm
• Servos: 2