Buy now at: https://cults3d.com/en/3d-model/gadget/j-20-mighty-dragon-twin-40mm
This is probably the most detailed model ive designed to date. I'm not the best at detail work but I felt like doing it with this one. The design is easy to print and easy to assemble. Its also easy to hand launch, fly and land. I really enjoy flying this one, it wants you to fly it crazy. You can see this in my first video lol. I just flew it reckless and burned in lol. Overall id say its an intermediate plane. it flies like the eurofighter and maybe the SU-47. slightly more power than the SU-47. It flew very nicely in calm wind, very nice low speed handling. in high wind it would be perfect with a flight controller.
NEVER buy a 3d printed plane without uncut videos of the HAND LAUNCH and LANDING! i cant stress this enough. so many scammers are chopping up videos to make planes look great. Full flights un edited should be a requirement.
final flight videohttps://youtu.be/cHICasWEFa4?si=c8pWMu2DeiPyHW7I
maiden flights https://youtu.be/jbnd0L_7YDQ?si=tru4rXDkkerISIGt
Specs:
25" wide
39" long
860g ALL up weight with a 1500
Items needed
2x xfly 40mm edfs
2x 20 or 30 amp ESC's your choice!
y adapter to split one battery into two ESC's
2x motor wire extensions
1500-2200 4s lipo recommended
2 9g servos
velcro
hot glue
1.2 mm pushrods
control horns are included
hinge material are included
3D printing settings
as always, you need to dial your specific printer in for active foaming LW PLA. if you have a bambu i can send you my profile
3-4% grid for everything. I always use 4% grid on elevons