This jet really surprised me. I wasnt sure if it was going to have F-18 flying character or be something like it. To my surprise it feels like a very stable F18 without the crazy authority. I'm able to really enjoy flying this plane on 3s! with a 4s the hand launches will be easier and slightly heavier. I cant really say anything bad about the flight characteristics.

This is the same design as my 64mm with modifications to the scale for the 50mm xfly EDF and also reworked servo pockets for 9g servos. It flies exactly the same as my 64mm but it lands way softer. This jet is only 595g FLYING WEIGHT with a 4s 1300! flight video https://youtu.be/vO_r1Mu8R5Q?si=jXBaZcqT5S-2N1-T

Aircraft Specifications

• EDF: single 50mm

The pocket rocket was originally designed to be a super easy to print and really easy to assemble. It uses a 50 mm EDF from X fly. The design is extremely efficient and easy to fly. I designed a self leveling and stabilizing wing. The canopy can be friction fit or you can add magnets if you choose there are only 15 pieces to print the build plate volume is 220 x 2 20 x 220.

This Gripen flies like you mated my F16 with my Mirage 2000. it rolls like a drill bit and will cobra! flies very stable. My wing design makes my jets fly like they have a gyro inside. this will not wing tip stall. it will gently drop the nose. hand launches super easy. Very easy to print and build. All my builds simply CA glue together. No instruction manual required.

Here is a beautiful formula 1 car specially designed to be easily printed by any 3d printer with a build plate size of 220/220/220 or larger. Honestly if you know how to resize items and rescale you can print. This on any size. It’s designed to be 32” long and .75” thick. Easily glues together with super glue. It’s only 4 parts. Normal PLA settings. Any regular PLA will work.

I’ve always been fascinated with the J10. Ever since I saw the RC turbine Carf j10s with vectored thrust I was amazed and wanted a park flier sized version. I have owned a few foam versions, but they never flew quite right this 64MMJ 10 flies incredibly it has very large control surfaces so it’s the most maneuverable jet I’ve made so far you will need to lower the rates and use exponential.

This model flies exactly like my 64mm version does just way more power and more roll authority. same setup and build as all my other planes. Build Plate 250mm x 250 x 250. You can still print his if you know how to slice parts slightly smaller.

I never thought I would design a jet that would outperform the Mirage but it’s happened. This Viggen will do things that no other 3-D printed EDF can do. It will slow fly like a trainer and float in for landings, unlike any EDF I’ve ever seen. It also tracks as true as the Mirage does, and that’s amazing fully functioning canards. And only 850 g flying weight.

This 3d printed F- 35 is one of the best flying 3d printed planes I’ve ever seen or flown. Eflite ultrix 600 donor electronics are required but you’re welcome to try your own build with twin props or even a pusher design. If you buy one I will make a pusher prop adapter. The plane is 360 g all up weight. In all honesty, it flies better than the ULTRIX.